Kranas virtuvei,voniai su temperaturos indikacijaSkelbimo nr. 319934, įdėtas 2011-03-01 · Perskaitė:
Krano stikline dalis sviecia priklausomai nuo vandens temperaturos.Pamatyti kaip tai veikia galima cia:
http://www.youtube.com/watch?v=rba9y4p8Pk4&feature=related Brand new in box ready to ship; The LED light is powered by 4 units of AA battery, 1.5V (included in the package), and the light only works while open the faucet . This item will change its color by detecting water temperature; Durable Solid Brass & Tempered Glass Construction; Polished Chrome Finish; When water temperature is<32 degree, Green color will show automatically; When water temperature is between 32~45 degree,Blue color will show; When water temperature is above 45 degree, Red color will show. Weight:1053g specifications: 30.5*22*14cm Tools You Need for Installation Adjustable wrench Tape Screwdriver Flashlight General Faucet Installation Instruction Please kindly note that this is just a general instruction, each faucet you buy from us has installation instruction with details inside package. Step 1: Position the Faucet A: Begin installing your faucet by placing the gasket and faucet in position on the sink. B: From under the sink, thread the plastic mounting nuts onto the faucet shanks. Be sure the large side of each plastic mounting nut is up. C: From the top of the sink, check the faucet and gasket position. D: From under the sink tighten the mounting nuts, making certain not to over-tighten which could damage the nuts and make them difficult to remove in the future. Step 2: Attach the Water Supply Tubes A: Wrap the threads of the water-supply valve with Teflon tape. Although most plumbers use only Teflon tape, some plumbing supply manufacturers also recommend using plumbers putty. B: Thread the water supply nut onto the shut-off valve. Tighten the nut with a wrench. C: Wrap the threads on the faucet shank with Teflon tape, and then thread the water supply nut onto the faucet shank. D: Tighten the nut with a wrench. Step 3: Connect the Faucet Lift Rod A-1: From the top of the sink, insert the lift-rod into the faucet. A-2: From under the sink, make sure the pivot-rod is in the down position. Insert the lift-rod into the lift-rod strap. Tighten the screw. B-1: From the top of the sink, make sure the lift-rod opens and closes the drain plug as desired. B-2: Make any needed adjustments by loosening the lift-rod strap screw and repositioning the lift-rod. B-3: If you need to connect the lift-rod strap to the pivot rod, slide one end of the spring clip onto the pivot-rod. B-4: Make sure that both the pivot -rod and the lift-rod are in the down position. Insert the pivot-rod in the closest hole in the lift-rod strap. B-5: Slide the other end of the pivot-rod. Make sure the lift-rod opens and closes the drain plug as desired. C-1: Make minor adjustments by loosening the lift-rod strap screw and repositioning the lift-rod. C-2: Make major adjustments by removing the spring clip and moving the pivot-rod to a different hole in the lift-rod strap. Step 4: Flush the Faucet Kaina: 250 EUR |