Kranas virtuvei,voniai su temperaturos indikacija

Skelbimo nr. 319934, įdėtas: 2011-03-01, atnaujintas: 2011-03-11 · Perskaitė: 576

Skelbimas nebegalioja.

Krano stikline dalis sviecia priklausomai nuo vandens temperaturos.Pamatyti kaip tai veikia galima cia:

http://www.youtube.com/watch?v=rbaypPk&feature=related

Brand new in box ready to ship;
The LED light is powered by units of AA battery, .V (included in the package), and the light only works while open the faucet .
This item will change its color by detecting water temperature;
Durable Solid Brass & Tempered Glass Construction;
Polished Chrome Finish;
When water temperature is< degree, Green color will show automatically;
When water temperature is between ~ degree,Blue color will show;
When water temperature is above degree, Red color will show.
Weight:g
specifications: .**cm


Tools You Need for Installation
Adjustable wrench
Tape
Screwdriver
Flashlight
General Faucet Installation Instruction
Please kindly note that this is just a general instruction, each faucet you buy from us has installation instruction with details inside package.
Step : Position the Faucet

A: Begin installing your faucet by placing the gasket and faucet in position on the sink.
B: From under the sink, thread the plastic mounting nuts onto the faucet shanks. Be sure the large side of each plastic mounting nut is up.
C: From the top of the sink, check the faucet and gasket position.
D: From under the sink tighten the mounting nuts, making certain not to over-tighten which could damage the nuts and make them difficult to remove in the future.
Step : Attach the Water Supply Tubes
A: Wrap the threads of the water-supply valve with Teflon tape. Although most plumbers use only Teflon tape, some plumbing supply manufacturers also recommend using plumber’s putty.
B: Thread the water supply nut onto the shut-off valve. Tighten the nut with a wrench.
C: Wrap the threads on the faucet shank with Teflon tape, and then thread the water supply nut onto the faucet shank.
D: Tighten the nut with a wrench.
Step : Connect the Faucet Lift Rod
A-: From the top of the sink, insert the lift-rod into the faucet.
A-: From under the sink, make sure the pivot-rod is in the down position. Insert the lift-rod into the lift-rod strap. Tighten the screw.
B-: From the top of the sink, make sure the lift-rod opens and closes the drain plug as desired.
B-: Make any needed adjustments by loosening the lift-rod strap screw and repositioning the lift-rod.
B-: If you need to connect the lift-rod strap to the pivot rod, slide one end of the spring clip onto the pivot-rod.
B-: Make sure that both the pivot -rod and the lift-rod are in the down position. Insert the pivot-rod in the closest hole in the lift-rod strap.
B-: Slide the other end of the pivot-rod. Make sure the lift-rod opens and closes the drain plug as desired.
C-: Make minor adjustments by loosening the lift-rod strap screw and repositioning the lift-rod.
C-: Make major adjustments by removing the spring clip and moving the pivot-rod to a different hole in the lift-rod strap.
Step : Flush the Faucet